V491 : AJA Kona LHe Plus SDI Video Capture Card

AJA Kona LHe Plus SDI Video Capture Card

Video Formats
– 525i 29.97
– 625i 25
– 720P 50, 59.94, 60
– 1080i 25, 29.97, 30
– 1080PsF 23.98, 24, 25, 29.97, 30
– 1080p 23.98, 24, 25, 29.97, 30

Video Input Digital
– SD/HD SDI, SMPTE-259/292/296, 8- or 10-bits
– Single Link 4:2:2 (1 x BNC)

Video Output Analog
– Composite/S-Video (Y/C) (1 x BNC/2x BNC+adapter)
– NTSC, NTSCJ, PAL
– 12-bit A/D, 2x oversampling
– 3 line adaptive comb filter decoding
– +/- .25 dB to 5.0 MHz Y Frequency Response
– +/- .25 dB to 1 MHz C Frequency Response
– .5% 2T pulse response
– <1.5% Diff Phase
– <1.5% Diff Gain SD Component (3 x BNC)
– SMPTE/EBU N10, Betacam 525 line, Betacam 525J, RGB
– 12-bit D/A, 2x oversampling
– +/- .25 dB to 5.5 MHz Y Frequency Response
– +/- .25 dB to 2.5 MHz C Frequency Response
– .5% 2T pulse response
– <2 ns Y/C delay inequity

Video Output Digital
– SD SDI, SMPTE-259M, 10-bit
– HD SDI, SMPTE-292/296, 10-bit
– Video Output Analog
– Composite/S-Video (Y/C) (1 x BNC/2x BNC+adapter)
– NTSC, NTSCJ, PAL
– 12-bit D/A, 8x oversampling
– +/- .2 dB to 5.0 MHz Y Frequency Response
– +/- .2 dB to 1 MHz C Frequency Response
– .5% 2T pulse response
– <1% Diff Phase
– <1% Diff Gain Component (3 x BNC)
– HD: YPbPr, RGB
– SD: YPbPr, RGB (component mode)
– SMPTE/EBU N10, Betacam 525 line, Betacam 525J, RGB
– 12-bit D/A, 8x oversampling
– +/- .2 dB to 5.5 MHz Y Frequency Response
– +/- .2 dB to 2.5 MHz C Frequency Response
– .5% 2T pulse response
– <1 ns Y/C delay inequity

Audio Input Digital
– 8-channel, 24-bit SMPTE-259 SDI embedded audio, 48kHz sample rate, Synchronous
– 2-channel, 24-bit AES/EBU audio, 48kHz or 96 KHz sample rate, Synchronous or Non-synchronous, Internal sample rate conversion (via 1 x XLR on breakout cable or optional KL-Box)

Audio Input Analog
– 2-channel, 24-bit A/D analog audio, 48kHz sample rate, balanced (via 2 x XLR on breakout cable or optional KL-Box)
– +24dbu Full Scale Digital
– +/- 0.2db 20 to 20kHz Frequency Response

Audio Output Digital
– 8-channel, 24-bit SMPTE-259 SDI embedded audio, 48kHz sample rate, Synchronous
– 2-channel, 24-bit AES/EBU audio, 48kHz or 96 KHz sample rate, Synchronous or Non-synchronous, Internal sample rate conversion (via 1 x XLR on breakout cable or optional KL-Box)

Audio Output Analog
– 2-channel, 24-bit D/A analog audio, 48kHz sample rate, balanced (via 2 x XLR on breakout cable or optional KL-Box)
– +24dbu Full Scale Digital (0dbFS)
– +/- 0.2db 20 to 20kHz Frequency Response
– 2-channel unbalanced output (via 2 x RCA jacks on optional KL-Box)

Down-Conversion
– Hardware 10-bit
– Anamorphic: full-screen
– Letterbox: image is reduced with black top and bottom added to image area with the aspect ratio preserved
– Crop: image is cropped to fit new screen size

Reference Input
– Analog Color Black (1V) or Composite Sync (2 or 4V)
– Looping
– 75 ohm on optional KL-Box, terminated on supplied breakout cable

Machine Control
– RS-422, Sony 9-pin protocol (via breakout cable or optional K3G-Box)
– 9-pin D-connector pinout is as follows:
1 GND
2 RX-
3 TX+
4 GND
5 No Collection
6 GND
7 RX+
8 TX-
9 GND Shell GND

Garantie, réservation & échange
Conditions générales de vente